PLEASE NOTE: If you had an account with the previous forum, it has been ported to the new Genetry website!
You will need to reset the password to access the new forum. Click Log In → Forgot Password → enter your username or forum email address → click Email Reset Link.
I would think that the https://www.steinair.com/product/22-ga-2-conductor-shielded/
So technically, I'll probably end up mixing single-conductor shielded with 2-conductor shielded on the connectors. I've ordered some single-conductor shielded wire for a preliminary test.
The signals go together, and the FET source wire is connected to a high amperage point--so technically, it doesn't need to be a 2-conductor shielded cable. I really don't care too much what gets induced on the wires...as long as the gate-source pairs move together. Differential EMI seems to be the issue we're up against.