PLEASE NOTE: If you had an account with the previous forum, it has been ported to the new Genetry website!
You will need to reset the password to access the new forum. Click Log In → Forgot Password → enter your username or forum email address → click Email Reset Link.
Uhm, I hope my inverter isn't getting shipped until it works as expected. . . Sid, I guess your the middle man. . . Guess I need to PM you with my Honey I shrunk the kids useing linux list. . .
I've already contacted Sean, and we should be able to bump you up to a 2nd shipment inverter with the updated terminal blocks / AC box cover on the end. I've spent the past few hours working on the GS inverter code...trying to get the self-zeroing code working so customers stop getting the annoying "GTM Regulate Fail" error. Then work on testing the revamped parallel code...then once I get that going, maybe later tomorrow Sean can start testing the revamped code, and then we might at long last be good to go...hopefully!
I've already contacted Sean, and we should be able to bump you up to a 2nd shipment inverter with the updated terminal blocks / AC box cover on the end. I've spent the past few hours working on the GS inverter code...trying to get the self-zeroing code working so customers stop getting the annoying "GTM Regulate Fail" error. Then work on testing the revamped parallel code...then once I get that going, maybe later tomorrow Sean can start testing the revamped code, and then we might at long last be good to go...hopefully!
Now I haven't seen that error. Only one other than the CPU not communicating has been the Low Voltage light and message at startup. Which is a bit odd as the Voltage has never been below 26 Volts when powering up.
Seems to be highly dependent on weird power-factor loads + a large bit of parts tolerances inside the inverter connected with absolute constants. Working on it 😉.
Finally my #:%\&typing board came up.sid will you please tell Sean not to ship my 2 yet to have more time to work out the kinks? I am no way a tech person I can't even hardly get Sean.please give him my email and number I don't know if he sent me something I had an email about gs but something was wrong and wouldn't let work.i don't even know what parts yuns are talking about with all those abbreviations only ideas.the simplest way to communicate or access wifi for dummies the better.even manually.but to see it on the phone or laptop is cool to monitor.[moderator: redacted private info; please use PMs for private info] I know mechanics and pretty well elec.i was a working in a whole other world besides tech.unles it was about something mechanical different dog.limited at that for mostly big stuff.didnt mean to but in.Tim
PS thanks I've watched the videos for a while you guys have came a long way.good work.
Done. Thank you for your patience. Just have so much on my plate, I've got to get things hammered out. Helps now that I'm basically off work, so I can work on this full time now.
Emails have been sent out. I have a long list of orders and yes most people want to wait.
32 minutes ago, Sean Genetry Solar said:Emails have been sent out. I have a long list of orders and yes most people want to wait.
Thats Good, maybe Sid will crack the code and I can get my Pups next week as well. Awaiting to see the demo of dasy boiling water like mad. . .
I'll do my best <a contenteditable="false" data-ipshover="" data-ipshover-target="/profile/3-the-blind-wolf/?do=hovercard" data-mentionid="3" href="/profile/3-the-blind-wolf/" rel="">@The Blind Wolf. So many different projects, prioritizing is very difficult, as all of them are important.
I'll do my best @the-blind-wolf. So many different projects, prioritizing is very difficult, as all of them are important.
Poor, Poor Sid, Over worked, Under Paid and a Kick Butt guy that can do it all.
I just contacted a company to have a simple, and I mean simple .stl file made of a 17x2.30x5.80: battery case made so I can print it off. . . They wanted $125 bucks a hour their normal rate. . . though I think I'm going to get a deal since well I'm blind and what I requested is so freak simple, if I was able to see again I could do that crap in my sleep and be a rich person lol.
I can make one for you if you want
it will be very basic however no shampfer's or other fancy things
I would need measurements in mm
On 4/30/2021 at 10:48 AM, The Blind Wolf said:Thats Good, maybe Sid will crack the code and I can get my Pups next week as well. Awaiting to see the demo of dasy boiling water like mad. . .
FINALLY have the commercial project pretty much done. Might be able to get back to the GS code tonight, madly adding the features customers need/want...getting daisy chain working, plus adding the generator start code (gasp!) Numerous bugfixes and improvements...
Thank you both Sid and Sean I know you both have a lot on your plates.
I can make one for you if you want
Wish I knew that before I spent the money. yeah it was basic. too easy, and sucks it cost so much.