PLEASE NOTE: If you had an account with the previous forum, it has been ported to the new Genetry website!
You will need to reset the password to access the new forum. Click Log In → Forgot Password → enter your username or forum email address → click Email Reset Link.
FINALLY have the commercial project pretty much done. Might be able to get back to the GS code tonight, madly adding the features customers need/want...getting daisy chain working, plus adding the generator start code (gasp!) Numerous bugfixes and improvements...
Sweet. Well, tommoro I'll be printing out my battery case that I had design, and its going to be sweet, will have some photos of it when I get them made, each end will have a terminal, yet the cell or cells will be inside sealed and if I could figure out the balancer, once I get them in my hands, I might can incorp them into the design :P.
Just order another 3d printer, taking too long to print one thing. . . Had to break this on down and file the track on the y track cause I didn't noticed that it was damage when I got it and was why it was causeing all the issue with printing big object, among other things, just got it back up going and its 12 hours into a print with no issue. once it get done with this print I'l be printing out two parts for the new printer so I can have it up and going when it arrives. I got to print out two parts per battery cell or cells holder. So just on one bank thats 16 prints I got to do. so will have one do red color and the other do black color since one side is kind of diff with a t seam and the other is a straight edge to go into it. Anyhow, hopeing to get most of it printed off before the inverters show up, cause thats going to suck batteries and I got to bring each bank that I build down to repackage them and so forth to make them safer and easy to deal with. instead of sitting in either a ammno plastic box or a chip tot 😛 The cell holders I got design will allow me to do 18650, 16650 and those big darn presmatic cells I got.
I know the feeling bought a brand new one that failed 3 1/2 roll in , the bearings on the extruder exploded
from the looks of it the bearings were rusted ...