PLEASE NOTE: If you had an account with the previous forum, it has been ported to the new Genetry website!
You will need to reset the password to access the new forum. Click Log In → Forgot Password → enter your username or forum email address → click Email Reset Link.

Notifications
Clear all

Mounting of the 6k GS Inverter.

19 Posts
7 Users
0 Likes
424 Views
(@the-blind-wolf)
Prominent Member
Joined: 4 years ago
Posts: 878
Topic starter  
Posted by: @thebutcher
The voltage listed on the ebay / amazon ones is as meaningless as the amperage. Unless you buy it from a reputable seller that states it is the genuine item anything in the style as you have shown is fake junk.

I don't see any product. just a bunch of jibberish after accepting a dirty cookie. . .  Must not be any good.


   
ReplyQuote
(@inphase)
Estimable Member
Joined: 4 years ago
Posts: 159
 

You can get a decent used molded case breaker on eBay for cheap. I wouldn't use a second hand breaker in a contracted job, but for myself, I would risk it. Here's a 400 amp 2 pole breaker with a 250 VDC rating

  https://www.ebay.com/p/1428853619

 

 


   
ReplyQuote
(@the-blind-wolf)
Prominent Member
Joined: 4 years ago
Posts: 878
Topic starter  

Well, got the master back up and running on the wall, and its actually running cooler doing the way I mount it this time. since its pulling the cold air from the ground. ambant temp is 67F  got all my stuff on bus bars and should have the slave on the wall by tomorrow.  after I mount it on the ply wood and then test fire it get it on the wifi and all that. 


   
ReplyQuote
 Tim
(@tim)
Eminent Member
Joined: 4 years ago
Posts: 44
 

I think ac/DC marine has good breakers also has elect.for yachts however you spell it. Big boats.


   
ReplyQuote
Page 2 / 2