PLEASE NOTE: If you had an account with the previous forum, it has been ported to the new Genetry website!
You will need to reset the password to access the new forum. Click Log In → Forgot Password → enter your username or forum email address → click Email Reset Link.
Nope, both are stored in the WiFi board. Just the setup will be need to be redone (voltages, etc.)
cool. Cause right now my friend that help me installed to the main, ended up with the china virus last friday and I've not been able to get any word on how he is doing since monday. Which sucks cause he lives like a 5 min walk from my house to his, and he is also my grocery getter and stuff geesh. sucks.
not sure if sean sent out the gs friday or not, since I never got a email saying otherwise, though if anything gets sent to me with ups I normaly get a email alarting me that a package is inbound.
Installed the release 1.1r3 and it seems to have mostly taken care of the instability that was there when running the AC. I can still see a bit of flicker that is not present when the unit is off but is almost not noticeable anymore. I will have to take a look at the waveform when I get a chance but this update seems to have mostly fixed the issue I was having with the AC.
I can still see a bit of flicker that is not present when the unit is off but is almost not noticeable anymore.
Always glad to hear a good report.
When the A/C is off and there's a smidge of flicker in the LED lights, could you go OUT -> Diag (past the 'scopes, 4th menu item) -> scroll all the way down to the bottom and watch the "Throttle" line? If it's constantly changing, the flickering is being caused by the inverter regulation...if it's rock-solid, the flickering probably is caused by other appliances down the line on the system.
When the A/C is running, is the "BattVolt" Diagnostic line holding fairly steady? (+/-2 counts max.)
Well, looks like I misread a bit of what you wrote...the flicker being present when the A/C is ON, not when it's off.
Could you check the BattVolt Diagnostic line while the lights are flickering? Want to make sure everything's working properly...