PLEASE NOTE: If you had an account with the previous forum, it has been ported to the new Genetry website!
You will need to reset the password to access the new forum. Click Log In → Forgot Password → enter your username or forum email address → click Email Reset Link.
hello, I have an 8000w power jack, it has a single fan, the fan stopped turning on, I tested it directly with the batteries and it worked, maybe it is the thermostat, but I connect the terminals directly with a screwdriver and it does not turn on. I'm still going to buy the thermostat to see if it works. Anything else that could be?
<a href="/monthly_2021_09/16307619644466430608427229671327.jpg.b93a8fe9753873e1f466ec3a05353408.jpg" class="ipsAttachLink ipsAttachLink_image"><img data-fileid="685" src="//forums.genetrysolar.com/applications/core/interface/js/spacer.png" data-src="/monthly_2021_09/16307619644466430608427229671327.jpg.b93a8fe9753873e1f466ec3a05353408.jpg" data-ratio="75" width="960" class="ipsImage ipsImage_thumbnailed" alt="16307619644466430608427229671327.jpg">
<a href="/monthly_2021_09/16307619923006272014111961122260.jpg.8f6fbac6006d05096a445e8cf89af38e.jpg" class="ipsAttachLink ipsAttachLink_image"><img data-fileid="686" src="//forums.genetrysolar.com/applications/core/interface/js/spacer.png" data-src="/monthly_2021_09/16307619923006272014111961122260.jpg.8f6fbac6006d05096a445e8cf89af38e.jpg" data-ratio="75" width="960" class="ipsImage ipsImage_thumbnailed" alt="16307619923006272014111961122260.jpg">
the fan stopped turning on, I tested it directly with the batteries and it worked, maybe it is the thermostat
The fan will always turn on at 39 degree C . Use a infrared thermoniter gauge to see if fan turn on . If not then shut off the inverter and get a car toggle switch to manually turn on the fan . I use a switch to keep the fan always on for my inverter .
7 hours ago, Rafaelmedina23 said:but I connect the terminals directly with a screwdriver and it does not turn on.
If you're shorting the thermostat directly with a screwdriver and the fan doesn't run, then there must be a problem further upstream where the fan connects to the battery.
If you're shorting the thermostat directly with a screwdriver and the fan doesn't run, then there must be a problem further upstream where the fan connects to the battery.
This is exactly that, the cable that comes from the negative was broken, I put it. Thank you so much