PLEASE NOTE: If you had an account with the previous forum, it has been ported to the new Genetry website!
You will need to reset the password to access the new forum. Click Log In → Forgot Password → enter your username or forum email address → click Email Reset Link.
Looks like your pump is about half the size of mine
I have trouble starting a refrigerator, and a 1/2hp 115V motor unless a small load is already running on the inverter. I didn't know this trick until recently, and haven't tried it with the well pump.
That is a logic board issue
My Upower dropps out for a sec starting just about any motor loads but the Plus Energy doesn't
I was kinda thinking it could be related to lower DC surge current due to higher input voltage
I was kinda thinking it could be related to lower DC surge current due to higher input voltage
Surge ability will actually be HIGHER with higher input voltage...as even with the same amperage limit, an increase of voltage (volts * amps) will result in higher wattage.
That was my logic
Just wasn't sure if the power Jack logic boards compensated for it
Just wasn't sure if the power Jack logic boards compensated for it
Ha. No, nothing of the sort.
This just got more interesting........
Just ran the tracking number and it shows 2 packages with same label
One returned to sender due to duplicate
That's what I'm thinking
I have no way to find out
This is funny
When Jack gave me the tracking number he listed description as 12K-LF-SP-48V/110V/220V-AMG, ASL2, no lcd, no charger
Thats the ASL2 in the 12K
Helen just told me she left the company
Helen just told me she left the company
Helen was transfer to handle returned inverter and remanufactured inverter according to her personal email to me . She longer handle complaint for PJ in China . I can not show her email . I hope you can still return your inverter and get a complete refund . Do not exchange for an inverter with the AMG2.0 transformer . No way to know if the transformer has a ASL5.0 as PJ will put any transformer in the case . Thank you for all your information as this show me that PJ do not know who is in charge but I trust Helen .
Considering how little I paid for it I'm thinking of just keeping it
Now that I know that they were sending me an ASL2 either way there's no point in getting it exchanged and with proper tuning and cooling this thing should perform quite well
Correct resonance will increase efficiency reducing heat, I'm just a bit surprised they didn't figure that out on the design level as it's been done on E frame inverters for decades (tuning them was part of my job)
If only I could get a bigger transformer.....that fits in the case
If only I could get a bigger transformer.....that fits in the case
My 8000kw PJ has a ASL5.0 and a ASL5.0 will fit in yours . PJ put the ASL5.0 in the AMG 16000kw . Helen also sell inverter parts on ebay but have to go thru ebay message or contact seller .
8 hours ago, dickson said:If only I could get a bigger transformer.....that fits in the case
My 8000kw PJ has a ASL5.0 and a ASL5.0 will fit in yours . PJ put the ASL5.0 in the AMG 16000kw . Helen also sell inverter parts on ebay but have to go thru ebay message or contact seller .
Are the larger transformers AMG? Does it matter? Did Helen run off with Ray Jungle Power? The timing is suspicious.