PLEASE NOTE: If you had an account with the previous forum, it has been ported to the new Genetry website!
You will need to reset the password to access the new forum. Click Log In → Forgot Password → enter your username or forum email address → click Email Reset Link.
My GS 6K invertor turns as soon as the on button is released, Any help is appreciated
Does it seem to function properly while holding onto the button? If so I'd wager it's just a faulty button.
@cali-carlos Yes it doees stay when the button is held, the switch is my suspiration also, just trying to confirm and see if the switch is available to purchase.
@mack-courtright @sid-genetry-solar will probably chime in on exactly what it is or maybe someone else knows a generic one.
That's my hope that Sid will pickup the conversation and will know exactly what it is. A where I can pick one up if it is just the switch but a control board is attached. Thanks for your help.
@mack-courtright I've heard of that issue with a few of the buttons...yeah, it's a generic "3-6v" RGB latching button that can be found on Aliexpress. I've got a few of the raw buttons, but none of the preassembled packs with the connector on them--Sean has those.
How I purchase one of the preassembled packs, can't solder anymore