PLEASE NOTE: If you had an account with the previous forum, it has been ported to the new Genetry website!
You will need to reset the password to access the new forum. Click Log In → Forgot Password → enter your username or forum email address → click Email Reset Link.
I was messing around with some gpu settings (how the heck it could have caused the issue is beyond me...it's only a 80 watt draw in a 650w system...odd coincidence?) and all electrical systems went down...I love all the beeps...reminds me of when I used to work...
The 6k inverter had a red button and a "low output warning." I powered the unit down and powered it back on and it was still red after about 20 seconds.
Went into setting and selected Reset errors... The unit powered off and when I pushed the button, it came back up green.
Output is reading 229 or 230v... (fluctuating)
Loads have been 800-1000w since we have a nice, relatively cool day.
Battery bank was at 54+ v at the time.
All is well in my mind...or is it?
Thanks for any input on this odd error.
I was messing around with some gpu settings (how the heck it could have caused the issue is beyond me...it's only a 80 watt draw in a 650w system...odd coincidence?) and all electrical systems went down...I love all the beeps...reminds me of when I used to work...
Weird.
What's the control board version on your inverter? (A.1 / B / C.) And, what's the firmware revision? (OUT -> Diagnostic Info -> top lines)
With that info, I should be able to determine what could cause that error.