PLEASE NOTE: If you had an account with the previous forum, it has been ported to the new Genetry website!
You will need to reset the password to access the new forum. Click Log In → Forgot Password → enter your username or forum email address → click Email Reset Link.
Bit of a preliminary release, but we discovered a fairly critical bug that needed immediate attention...thus this update. Has several fixes/features/etc.
- fix bug with Power Switch (causes random restarts) on Rev. B control boards and newer
- finally implement Generator Start functionality
-
add auto-zeroing function to internal amperage sensor (attempt to fix "GTM Regulate Fail" errors)
- also adding "GTM Disable" option in CFG -> AC Output/Inverter -> GTM Disable as a last resort. Disables the grid-tie master function though.
- fix WiFi webpage KWH reading x10 what it should
- fix up "Tech" update channel, so inverters will not "remember" this channel after a restart (or 1 hour's time, whichever is less). Prevent customers from unknowingly getting a Tech update that may brick their inverter
-
add preliminary "daisy" parallel inverter support (please do NOT rely upon...it's preliminary!)
- add adjustable "frequency droop" setting for master inverter.
Future features off the top of my head...when I can get the time to add 'em:
- mDNS local WiFi discovery
- local WiFi server for reading stats/controlling inverter
- local HTML page for configuring inverter setup (not WiFi setup)
If your GS inverter does not see this 1.1r2 update, set the Update Channel to "Rev.", exit the WiFi tab (back to Out screen), and power cycle the inverter with the power button. Should "find" it.
Installed the update yesterday, everything seems to be working fine and reporting correctly on the WiFi webpage. Now I just need to get more of the solar panels I have in storage installed and connected.
Glad to hear!
I need to update the WiFi webpage to also report the AC input voltage--the data is provided to the server, just not reported...